Compare Models

Home › Brands › Compare Models

SCAG Power Equipment SFC-30 30 in. Kohler Command PRO CV 224 Swivel Front Caster in Auburn, Massachusetts — SCAG Power Equipment SFC-30 30 in. Kohler Command PRO CV 224 Swivel Front Caster

View Details

Specs
Features

General Information

Manufacturer

SCAG Power Equipment

Model

SFC-30 30 in. Kohler Command PRO CV 224 Swivel Front Caster

Model Code

SFC-30-7CV-S-CA

Color

Orange

Drivetrain

Transmission/Drive

GT MV 702 Transmission

Travel Speed

Forward - Up to 4 mph

Wheels/Tires

Front - 9 x 2.25 in. rubber tire with glass-filled polypropylene wheel

Rear - 10.5 x 3 in. rubber tire with glass-filled polypropylene wheel

Front - 9 x 2.25 in. rubber tire with glass-filled polypropylene wheel

Rear - 10.5 x 3 in. rubber tire with glass-filled polypropylene wheel

Brakes

Parking - Hand lever

Engine

Engine Make

Kohler®

Engine Model

Command PRO® CV224

Horsepower

7 hp

Starter

Recoil

Fuel Capacity

0.37 gal.

Measurements

Length

Transport (handles in upright transport position) - 44 in.

Min. (handles in highest operating position) - 69 in.

Max. (handles in lowest operating position) - 76.5 in.

Transport (handles in upright transport position) - 44 in.

Min. (handles in highest operating position) - 69 in.

Max. (handles in lowest operating position) - 76.5 in.

Width

With discharge chute - 36.75 in.

With discharge block off plate - 31.5 in.

Tracking - 28.75 in.

With discharge chute - 36.75 in.

With discharge block off plate - 31.5 in.

Tracking - 28.75 in.

Height

Lowest operating - 36.75 in.

Max. operating - 45.25 in.

With handle bar in storage position - 57.5 in.

Lowest operating - 36.75 in.

Max. operating - 45.25 in.

With handle bar in storage position - 57.5 in.

Weight

Operating bagging - 233 lb.

Operating mulching - 227 lb.

Operating discharging - 226 lb.

Operating bagging - 233 lb.

Operating mulching - 227 lb.

Operating discharging - 226 lb.

Mowing Height Range

1.5 to 5 in. in 0.25 in. increments

Mowing Width

30 in.

Operational

Deck Construction

14 ga., grade 100, military grade steel deck shell with 12 ga. spindle reinforcement plate. 1/4 in. trim side reinforcement bar offers extra protection against impacts

Type - Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup

14 ga., grade 100, military grade steel deck shell with 12 ga. spindle reinforcement plate. 1/4 in. trim side reinforcement bar offers extra protection against impacts

Type - Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup

Deck Lift

Hand lever. Single-point adjustment

Spindles

Aluminum housing with sealed ball bearings

Blades

Optimized for maximum performance whether discharging, mulching or bagging

Engagement - Blade brake clutch allows operator to disengage cutter blades without shutting off the machine

Optimized for maximum performance whether discharging, mulching or bagging

Engagement - Blade brake clutch allows operator to disengage cutter blades without shutting off the machine

Discharge

Standard

Mulching

Standard

Bagger

Standard

Capacity - 2.5 bu.

Standard

Capacity - 2.5 bu.

Other

Warranty

1-Year Commercial Machine

3-Year or 500-hr. Non-Commercial Machine

SR Engine

90-Day Wear Item and Rental Use

Engine

1-Year Commercial Machine

3-Year or 500-hr. Non-Commercial Machine

SR Engine

90-Day Wear Item and Rental Use

Engine

Features

MOW WITH EASE - FRONT SWIVEL CASTER WHEELS: Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
FULLY FABRICATED AND WELDED STEEL CUTTER DECK - MILITARY-GRADE STEEL - DECK: Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.
FULLY FABRICATED AND WELDED STEEL FRAME - MILITARY-GRADE STEEL - FRAME: Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.
SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT - FINE-TUNED AND SIMPLE: Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.
OFFSET BLADE SET UP - SIMPLIFIED DECK DRIVE SYSTEM: An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
SCAG LEVEL QUALITY-OF-CUT - UNMATCHED PERFORMANCE: The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
OPERATOR CONTROL PANEL - ERGONOMIC CONTROLS: Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.
OVERSIZED ADJUSTABLE CONTROLS - ACHIEVE MAXIMUM COMFORT: Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.
DISCHARGE – MULCH – BAG - 3-IN-1 VERSATILITY: The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag
POWERFUL TRANSMISSION & ENGINE COMBO - MAXIMUM POWER FOR TOUGH CUTS: The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

Features

MOW WITH EASE - FRONT SWIVEL CASTER WHEELS: Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
FULLY FABRICATED AND WELDED STEEL CUTTER DECK - MILITARY-GRADE STEEL - DECK: Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.
FULLY FABRICATED AND WELDED STEEL FRAME - MILITARY-GRADE STEEL - FRAME: Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.
SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT - FINE-TUNED AND SIMPLE: Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.
OFFSET BLADE SET UP - SIMPLIFIED DECK DRIVE SYSTEM: An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
SCAG LEVEL QUALITY-OF-CUT - UNMATCHED PERFORMANCE: The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
OPERATOR CONTROL PANEL - ERGONOMIC CONTROLS: Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.
OVERSIZED ADJUSTABLE CONTROLS - ACHIEVE MAXIMUM COMFORT: Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.
DISCHARGE – MULCH – BAG - 3-IN-1 VERSATILITY: The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag
POWERFUL TRANSMISSION & ENGINE COMBO - MAXIMUM POWER FOR TOUGH CUTS: The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

Compare Models

SCAG Power Equipment SFC-30 30 in. Kohler Command PRO CV 224 Swivel Front Caster

SCAG Power Equipment SFC-30 30 in. Kohler Command PRO CV 224 Swivel Front Caster

General Information

Drivetrain

Engine

Measurements

Operational

Other

Features

Features

Motorsports International

Store Hours

Let's Connect